BOXXER XL  Hydramaster

BOXXER XL Hydramaster

BOXXERXL

Description

You get uncompromising performance in a high level dual wand power-packed truckmount from the Boxxer XL. Utilizing the HydraMaster Water Conservation System, it can be inactive under a full vacuum load for as long as 40 minutes without wasting fresh water. Whether you are setting up for carpet cleaning, or doing water extraction on a flood job, the “no-dump”/full bypass heat exchanger system means your hot water is used on the job, not dumped into the recovery tank, saving precious fuel every day. The Boxxer XL is 20% quieter than comparable slide-in truckmounts. The Boxxer XL produces a decibel level of 68db.  Finally, the Boxxer XL produces performance levels that most truckmounts only dream about – True dual wand capabilities; 400+CFM, attains 245◦F temperature; and proven and tested coupler direct driven blower.

 

 

Features

·         Handles residential and commercial cleaning jobs

·         Utilizing the HydraMaster Water Conservation System, it can        be inactive under a full vacuum load for as long as 40                        minutes without wasting fresh water.

·         The Boxxer XL is 20% quieter than a comparable slide-in                 truckmount.

·         True dual wand capabilities

·         400+CFM (static measurement), attains 245F temperature            (185F continuous flow at 1.25GPM)

·         Proven and tested coupler direct driven blower

·         Easy accessibility and serviceability with removable                           magnetic panels

Specifications

  • Subcategory: Slide In

  • Dimensions: 39”H x 24”W x 41”D

  • Weight: 800 lbs

  • Engine: 31 HP Briggs & Stratton; Air Cooled Engine

  • Ignition: Electric key start

  • Vacuum Blower: Competitor™ 4007 Tri-Lobe, HydraMaster exclusive design, 400+ cfm, dual oil bath site level windows

  • Pump: General HTX-1813, 4.0 gpm plunger pump, 1,200 psi heated, 1,200 psi unheated, electric clutch control

  • Max Temp: 245º F

  • Chemical System: Last-step chemical injection, meter controlled

  • Heating System: Tube and fin heat exchanger with ADC temperature control

  • Recovery Tank: 70 gallon MaxAir™ recovery tank; aluminum, baked-on powder coated finish, includes stainless steel filter and filter basket, 36 3/4"L x 14 1/4"W x 38 1/2"H, 100 lbs

  • Solution Hose Length: 100 ft x 1/4"

  • Vacuum Hose Length: 100 ft x 2"

  • Wand Capacity: Dual

  • Fuel Consumption: 1.6 gph

  • Uses: Residential and Commercial


Standard Equipment

  • Runtime hour meter

  • Solution (Chemical) flow meter (0-10gph)

  • Solution (Chemical) flow control valve

  • Vacuum gauge (0-30” Hg)

  • Solution pressure gauge (glycerin filled)

  • Solution pressure adjustment

  • Pre-wired pump-in switch

  • Pre-wired Automatic Pump-Out (APO) switch

  • Fresh water inlet

  • Water system drain valve

  • Diverter valve (with ADC control)

  • Diverter/clutch package for flood work

  • Electrical circuit protection

  • Pump clutch switch

  • Solution temperature control

  • Two solution outlets

Video

 
© Cleaning Systems Limited
www.cleaningsystems.co.nz