Water Blasters

KARCHER WATERBLASTER HDS 5/11 U

KARCHER WATERBLASTER HDS 5/11 U

KA-HDS5/11U

Description

Technical data
Power supply Ph/V/Hz
 
1 / 230 / 50
Water flow rate (l/h)
 
450
Pressure bar/MPa
 
110 / 11
Max. temperature (°C)
 
max. 80
Connected load 
 
2.2
Consumption fuel oil (kg/h)
 
2.4
Fuel tank (l)
 
6.5
Weight (kg)
 
68
Dimensions (L x W x H) (mm)
 
620 x 620 x 990
Detergent tank (l)
 

 

pdf_iconsmall.GIF Download Brochure here

Description

The main benefit of the new "Upright"-class class of hot water
high-pressure cleaners is the horizontal machine concept.
This ensures low weight, compact dimensions and the ease with which
they can be loaded and transported.
They fit also easily in vertical position in a station wagon for transportation
from one location to the next.
Thanks to their compact size, these units take up a minimum of storage
space when they are not in use.
Large diameter wheels as well as a ergonomically shaped push/pull handle
ensure excellent manoeuvrability and mobility, even on difficult surfaces.

The three-piston axial high-pressure pump has hardened stainless-steel pistons and a brass cylinder head. A pressure switch shuts down the unit automatically when the trigger gun is closed. This relieves the load on components and prolongs their service lives.

High-pressure pump, burner fan and heating oil pump are driven by an electric motor and are combined to form a drive module. This principle not only ensures a very compact assembly and a high power output, it also makes the units exceptionally reliable.

The characteristics of the time-proven Kärcher boiler-technology are
high performance in a minimum of space while ensuring full compliance
with the statutory emission limits.

Single-phase unit with air-cooled two-pole electric motor. Three-piston
axial pump with hardened stainless-steel pistons.
Chemical feed in low-pressure mode.

 


Application
Cleaning vehicles and workshops in small companies, such as
- locksmith
- Plumbers, gas-/ heatiung installers
- Painters, floor tilers and plasterer with occasional facade cleaning work
- General cleaning tasks in the crafts and trades
- small garages, tire dealers
- Building service contractors


Features & Benefits
Central control panel
One-switch-control for on/off and hot and cold water operation.

Plastic chassis with integrated 6,5 l fuel tank
Multifunctional, corrosion-proof, impact-resistant and shock-proof
Chassis with bumper and integrated hose and accessory storage.

Flue gas temperature monitoring
The flue gas temperature limiter installed in the outlet switches off the
drive motor if the flue gas temperature exceeds over max. temperature
and thus ensures additional operator safety.

Efficiency
With a max. water temperature of 80°C the machine cleans also subborn
oily and greasy stains.
Fine mesh water filter

The fine mesh water filter on the machine inlet traps suspended matter
and protects the high-pressure pump from impurities.
Manoeuvrability
Sturdy large diameter wheels with rubber tyres guarantee trouble-free manoeuvrability. This is enhanced by a ergonomic handle, which is
suitable for pushing or pulling the machine.

Tilting aid
The tilting aid enables the machine to be tilted to overcome obstacles such as steps, for example.

Ergonomics
The fuel tank could be easily refilled, the integrated hook
ensures a convenient storage of the high-pressure hose.

 
© Cleaning Systems Limited
www.cleaningsystems.co.nz