Dri-Eaz

DRIEAZ DEFENDAIR 500 F284 AIR SCRUBBER

DRIEAZ DEFENDAIR 500 F284 AIR SCRUBBER

DRI-DEFAIR

Description

 

  • Built-in MICROBAN® antimicrobial product protection kills growth of bacteria, mold, and mildew that can cause stains, odors, and product deterioration
  • Advanced filtration technology, available through exclusive partnership
  • Power friendly—uses just 1.5 amps
  • Variable CMH on each unit
  • Stackable, lightweight, and easily transportable
  • DefendAir HEPA 500 Specifications
    UK ModelF284-230V
    Voltage230V
    Power1.5 amps
    Height62,5 cm (26.6 in)
    Width66,5 cm (26.2 in)
    Depth46,2 cm (18.2 in)
    Ductable Intake: 3.5cm; Outlet: 20.3cm
    Use Weight19.9 kg
    Ship Weight20.8 kg
    Frequency50 hz
    Airflow Rating (Min)562 CMH
    Airflow Rating (Max)713 CMH
    Filter System2-stage/optional carbon filter
    Primary FiltersHEPA filtration technology
    HousingRotomolded, with built-in *Microban® antimicrobial protection
    Power Cord Length7.62m
    Variable Speed 331 CFM - 421 CFM
    Filter Indicator LightPre-Filter change
    Safety MarksCE

     

    General filter information:

    First Stage Pre-Filter

    High quality filter restores the HEPA 500 airscrubber to full efficiency. Replace regularly to ensure maximum performance.

    • Low pressure drop and superior efficiency
    • High dust-holding capacity

    Synthetic fiber filter media rated at 10% efficiency. Captures the largest particles to help extend the life of the higher efficiency filters inside


    Second Stage Pre-Filter

    Regular filter replacement ensures maximum efficiency and helps to prevent cross contamination. Sturdy, high capacity filters effectively captures airborne particles; won't "blow out" under heavy use.

    • High dust-holding capacity
    • Minimal airflow loss means superior efficiency


    Synthetic fiber filter media rated at 30% efficiency. Captures larger particles to help extend the life of the HEPA filter.


    HEPA 500 Filters

    HEPA 500 filters combine filtration ability with filter capacity. To maximize HEPA filter life, be sure to change the prefilters regularly.


    Activated Carbon Filter

    HEPA filtration is increasingly seen as the single most important safety device available for creating a safe environment for jobsite workers. Now, with the Activated Carbon Filter, the DefendAir can play an even more important role in keeping an enclosed environment clean and safe – both for workers and for occupants.
    • Captures a wide variety of volatile organic compounds (VOCs)
    • Utilizes Extruded Activated Carbon – carbon pellets manufactured to uniform size helps to ensure maximum airflow and maximum contact  
    • Works by adsorption, carbon filtration’s natural ability to attract and hold gas and liquid molecules on its surface.
    • One pound of carbon has 534,438 square yards of available surface – equivalent to the area covered by more than 100 football fields.

    The activated carbon filter now equips the HEPA 500 to capture a wide variety of volatile organic compounds (VOCs), including soot and smoke, food odors, fumes from paint and paint thinners, sewer odors, and many other compounds.
     
    No modification of the DefendAir is required – users simply place the new carbon filter inside the cabinet in front of HEPA filter, and then re-secure the cover. Capacity of the carbon filter will vary widely depending on conditions, but it should be replaced when a decline of effectiveness is noted. 


    DOP Stage 2 HEPA 500 Pre-Filter

    The addition of the DOP filter makes the DefendAir HEPA 500 a high efficiency three-stage air filtration unit, ready for any sensitive job requiring first-pass HEPA filtration. With the standard pre-filter, DOP Stage 2 pre-filter and the HEPA primary filter installed, the HEPA 500 passes laboratory DOP testing conducted per ANSI standards, achieving an efficiency rating of 99.97% against oily aerosol particles down to 0.3 microns.

    Passes laboratory DOP testing when installed as part of three-stage filtration process
    Equips the HEPA 500 for a wide range of environments that require first-pass high efficiency air filtration.
    Install the DOP filter between the standard pre-filter and the HEPA primary filter.  
    DOP stands for "Dispersed Oil Particulate," the name of a standard procedure for testing the effectiveness of HEPA filtration. The DOP test introduces an dense cloud of extremely fine particulates into the filter under controlled conditions. DOP testing is often conducted in specific types of stringent air quality control job sites that require first-pass HEPA filtration. 




     

     
    © Cleaning Systems Limited
    www.cleaningsystems.co.nz