FIRE SPONGE

FIRE SPONGE

PCC-SPONF

Description


Awesome cleaning power with the Fire Sponge
The Fire Sponge provides unmatched soot and smoke residue removal when teamed up with Fire Restore.
Mixing:
  •  Add 50-100ml Actichem Fire Restore per litre of water (1:10 to 1:20) depending on soil conditions.
  • For heavy soil conditions, up to 200ml per litre can be added. If used on painted surfaces, always pre-test for substrate chemical sensitivity.
Application:
Only apply solution to an area which can be cleaned and rinsed within 30-40 minutes.
1. Apply the solution to a workable area using the Fire Sponge or sprayer. Do not allow solution to dry onto the surface.
2. Allow 10 to 15 minutes dwell time.
3. Agitate areas with the Fire sponge. (Pre-wet the sponge in Fire Restore solution)
4. Rinse the surface thoroughly using clean water. A high pressure washing system provides effective results.
Wash Fire Sponge pad with clean water. Very dirty sponges can be cleaned in Fire Restore Solution.


 
© Cleaning Systems Limited
www.cleaningsystems.co.nz