DYE SPOT - KemSpec

DYE SPOT - KemSpec




Dye Spot Specifications
pH:1% solution: 4.5 - 5.5Coverage:Varies
Fragrance:SulfiteAppearance:White powder yellow flake

Effective on new or old spots — Designed to modify and reduce stain color on even the most stubborn stain areas. Just spray on spot, allow to dry, and vacuum the area. If using as a pre-spray, just spray spot, wait 10 - 15 minutes, and clean!

Easy to use — Place funnel in quart carafe bottle. Add 1 fl powdered oz. of Spray ’NGo and fill with hot water. Insert sprayer, close tightly, and shake until dissolved (approx. 2 - 3 times). Spray spot completely until moist. Allow to dry and either vacuum or wet clean the area.

To make 1 gallon of ready-to-use product, just mix 6 scoops in a 1 gallon container, fill with hot water, and mix until dissolved.Fast, easy solution for a variety of spots. Specifically formulated to remove tannin stains such as urine, cola, and coffee. Watch Betadine and some iodines quickly and effectively go away. You will love the results!

Chemspec Helpful Hints —

  • When cleaning stubborn stains, pre-spray with an enzyme product such as Chemspec PreKleen , Formula 70 , or Enzyme Shampoo mixed according to direction on label. Allow area to soak for 5 minutes to 1 hour, extract/rinse with cool water. Then apply Spray ’N Go and top with Chemspec’s Absorb-A-Stain®. Allow to dry and vacuum.
  • For Betadine stains, apply Dye spot , allow to sit overnight, then vacuum away any powder residue that may be present.
  • Pre-test in an inconspicuous area prior to use to ensure that the dye will not be affected.

pdf_iconsmall.GIF Download Product Label


PDF File IconDYE SPOT SDS [64 KB - pdf]

© Cleaning Systems Limited