Bait Stations

FLY SENTRY 30CM MINI SILO (SINGLE) FLY CONTROL

FLY SENTRY 30CM MINI SILO (SINGLE) FLY CONTROL

PC-FS30WMS

Description

 

Fly Sentry Pest Control for Flies

The smaller units also perform very well in medium-duty exterior applications including
residential backyards, pools and patios.

In cases of heavy fly infestations, Mini FlySentry silos require more frequent bait refilling than
Standard units

Installation is simple and easy.

 Three simple steps.

FlySentry can be installed using two included screws or mounted
on a metal pole using two zip ties, not included.
For installation, you will need a tape measure, screwdriver and granular fly bait.
(FlySenty units do not include bait. Please purchase separately.)
Installation instructions:
1. Install top screw at desired height. (For best results, silo tops should reach
    no higher than 42” above ground.)
2. Hang unit on top screw.
3. Install bottom screw and tighten. (Do not over tighten.)
4. Tighten top screw. (Do not over tighten.)
5. Snap out top cap.
6. Place a bucket under the silo.
7. Make sure bait tray is seated inside unit.
8. Pour granular fly bait into the top of the silo, automatically filling the tray.  
9. Lift bait tray by the funnel and allow fly bait in center tube to empty into
    the bucket. (This step saves bait and prevents bait overflow.)

10. Snap top cap back on

pdf_iconsmall.GIFDownload Instruction Brochure

 
© Cleaning Systems Limited
www.cleaningsystems.co.nz