Bait Stations

FLY SENTRY 91CM SILO (SINGLE) FLY CONTROL

FLY SENTRY 91CM SILO (SINGLE) FLY CONTROL

PC-FS91WS

Description

 

Fly Sentry Pest Control for Flies

Standard FlySentry units hold about three times as much bait as Mini silos, which means that, all else being equal, they require less-frequent refills.

Pest control professionals prefer Standard FlySentry silos for all outside uses as well as appropriate indoor applications like barns and covered riding rings.

Installation is simple and easy.

 
Three simple steps.

FlySentry can be installed using two included screws or mounted on a metal pole using two zip ties, not included.

For installation, you will need a tape measure, screwdriver and granular fly bait. (FlySenty units do not include bait. Please purchase separately.)

Installation instructions:
1. Install top screw at desired height. (For best results, silo tops should reach no higher than 42” above ground.)
2. Hang unit on top screw.
3. Install bottom screw and tighten. (Do not over tighten.)
4. Tighten top screw. (Do not over tighten.)
5. Snap out top cap.
6. Place a bucket under the silo.
7. Make sure bait tray is seated inside unit.
8. Pour granular fly bait into the top of the silo, automatically filling the tray.  
9. Lift bait tray by the funnel and allow fly bait in center tube to empty into the bucket. (This step saves bait and prevents bait overflow.)
10. Snap top cap back on

pdf_iconsmall.GIFDownload Instruction Brochure  

You could also be interested in these products...

 
© Cleaning Systems Limited
www.cleaningsystems.co.nz