Upholstery Fabric Protector 5 ltr
Water-based Fabric Protector suitable for protection of upholstery fabrics.
This ready-to-spray fabric treatment may only be applied to clean fabric. Fabric cleaned before treatment should be free of excess shampoo or detergents before application.
RTU Solution: Odourless Mineral Spirits Acrylic Fluoropolymer C6
Application:
- Ready to spray, do not dilute.
- Equipment preparation: Pour the fabric protector into the sprayer in a well ventilated area. Pressurize the container per the manufacturer’s guidelines.
- Spray Area preparation: Spray the furniture in a well ventilated area to assist drying time. If you can not get proper ventilation through the area we recommend the use of an airmover. Minimise exposure to others by limiting the number of people in the area while spraying the product.
- Spray applicator must be: An airless, pressure type sprayer operated at 30-45 psi. Power sprayers must not be used. Resistant to chemicals, including gaskets, fitting, hose etc Fitted with stainless steel or brass spray tip size 6502 Used for fabric protector only.
- Spraying: Hold the spray gun approx, 30 to 60 centimetres from the furniture to be treated. Use a smooth, swinging back and forth motion, slightly overlapping previous passes to ensure finish is evenly applied, avoid over-application. Use approx 80 to 90 mls per square metre on fabric. Allow the fabric to dry before moving and/or packing the furniture.
Form: Liquid
Colour: clear to amber
Odour: Mild petroleum
Boiling point: 183C
Flash point: 63C
Density at 200C, g/cc: 0.776
Solubility in water: Immiscible
pH: 5.4
Available: 5 Ltr, 20 Ltr